CHF 357.16
Do you have some questions about this product?
- Your personal contact person
- Name: Tobias Schneider
- E-Mail: tobias@normrahmen.ch
- Phone: +41 31 744 10 42
-
Head of Product Development and Consultancy, Management Board
Product information "Circuit-breaker EB2 250/3L 200A, Icu 25kA / Ics 19kA"
| Ics: | 19kA |
|---|---|
| Icu: | 25kA |
| Number of poles: | 3 |
| Rated current: | 200A |
| Rated voltage: | 690V |
| Setting value Magnetic: | 6-13 x In |
| Thermal setting value: | 0.63-1 x In |
Accessories for circuit-breaker EB2 250/3L 200A, Icu 25kA / Ics 19kA
Mounting from above only.
Two-part design for top and bottom.
Cannot be installed together with shunt outlet
For all EB2 sizes. I = 3A with resistive load with 24VCD/240VAC.
For all EB2 sizes. I = 3A with resistive load with 24VCD/240VAC.
Voltage range 85%-110%. Load current on actuation 3.5-7A depending on the applied voltage. As the motorised drive is designed for a short-term load, it must cool down for at least 15 minutes after 10 consecutive on/off cycles to ensure safe operation.
Voltage range 85%-110%. Load current during operation depending on the applied voltage at 3.5-7A. As the motorised drive is designed for a short-term load, it must cool down for at least 15 minutes after 10 consecutive on/off cycles to ensure safe operation.
