CHF 1,748.43
Do you have some questions about this product?
- Your personal contact person
- Name: Tobias Schneider
- E-Mail: tobias@normrahmen.ch
- Phone: +41 31 744 10 42
-
Head of Product Development and Consultancy, Management Board
Product information "Circuit-breaker with RCD EB2R 250/4L, 250A, Icu 25kA / Ics 19kA"
| Ics: | 19kA |
|---|---|
| Icu: | 25kA |
| Number of poles: | 4 |
| Rated current: | 250A |
| Rated residual current: | 30mA - 3A |
| Rated voltage: | 690V |
| Residual current type: | A |
| Setting value Magnetic: | 10 x In |
| Thermal setting value: | 0.63-1 x In |
Accessories for circuit-breaker with RCD EB2R 250/4L, 250A, Icu 25kA / Ics 19kA
Mounting from above only.
Two-part design for top and bottom.
For all EB2 sizes. I = 3A with resistive load with 24VCD/240VAC.
For all EB2 sizes. I = 3A with resistive load with 24VCD/240VAC.
Voltage range 85%-110%. Load current on actuation 3.5-7A depending on the applied voltage. As the motorised drive is designed for a short-term load, it must cool down for at least 15 minutes after 10 consecutive on/off cycles to ensure safe operation.
Voltage range 85%-110%. Load current during operation depending on the applied voltage at 3.5-7A. As the motorised drive is designed for a short-term load, it must cool down for at least 15 minutes after 10 consecutive on/off cycles to ensure safe operation.
Customers also bought
Mounting from above only.
Content: 1 Piece (CHF 120.50 / 25 Piece)
Content: 1 Piece (CHF 487.15 / 100 Piece)
PSR 203 150/5 2.5 0.5-WR 21 50-30
Customers also viewed
Hard rubber site power distributor 215S-06 40A Our hard rubber power distributors are ideal for both indoor and outdoor use. For industrial, commercial, trade and public areas. Compliance with all current regulations and standards (IEC EN-61439). The distribution boards can also be configured according to your individual requirements. Impact-resistant, corrosion-free, UV-resistant, halogen-free, flame-retardant and self-extinguishing, resistant to ageing and temperature, oil and acid-resistant, very good chemical resistance, graphite black Ral 9011, IP44, completely ready for connection, recorded design verification and parts certificates in accordance with IEC EN 61439-4 Features of hard rubber site power distributor 215S-06 40A: Direct wall mounting possible Dimensions (L x W x D): 340 x 215 x 130mm 1 x small handle 1 x FI 40A type A 3PN 30mA 2 x LS 16A C 3P 10kA 2 x socket outlet T25 230/400V 2 x socket outlet T23 230V 2 x socket outlet CEE 16A 400V 6h 2 x cable gland M32 Optionally available: Available without handle Base frames available for mobile use Can be engraved according to your specifications
Content: 1 Piece (CHF 120.50 / 25 Piece)
Content: 1 Piece (CHF 42.81 / 3 Piece)
Voltage range 85%-110%. Load current on actuation depending on the applied voltage at 3.5-7 A. As the motor drive is designed for a short-term load, it must cool down for at least 15 minutes after 10 consecutive on/off switching operations to ensure safe operation.
Mounting from above only.
