CHF 140.8484
Do you have some questions about this product?
- Your personal contact person
- Name: Tobias Schneider
- E-Mail: tobias@normrahmen.ch
- Phone: +41 31 744 10 42
-
Head of Product Development and Consultancy, Management Board
Product information "Residual current circuit-breaker, instantaneous, EFI-P4, type A, 4-pole, 63A, 10kA (0.3A)"
| Frequency: | 50 & 60 Hz |
|---|---|
| Neutral conductor links: | No |
| Number of poles: | 4 |
| Number of wiring points: | 8 |
| Protection class: | IP 20 |
| Rated current: | 63A |
| Rated residual current: | 300mA |
| Rated voltage: | 415V |
| Residual current type: | A |
| Short-circuit resistance: | 10kA |
| Short-term delayed: | No |
| Triggering behaviour: | Undelayed |
| Undelayed: | Yes |
| Width in pitch units: | 4 Module |
Customers also bought
Adjustable multifunction time relay with one changeover contact. Time window 0.1s - 10 days, divided into 10 ranges.
Mains and system protection NA003-M64 The reliable NA003-M64 mains and system protection (NA protection) from TELE Haase combines all standards in one device and can therefore be used universally. When operating alternative power generation, NA protection is required by law and disconnects the power generation system (photovoltaic, generator, battery buffer) from the grid in the event of a grid failure. This ensures the safety of the distribution grid, systems and people. In the event of a defined grid fault, the grid and system protection (NA protection) disconnects the power generation systems (photovoltaic, generator, battery buffer) from the grid. Its function is very important for the reliable protection of the electricity grid and the energy generation systems because it ensures that the connection of an energy generation system does not impair the function or safety of the distribution grid. Function: Protective relay that measures the mains voltage and frequency, contains the actual protective functions and generates the signal for disconnection from the mains 1-2 tie switches that ensure the actual disconnection from the grid To ensure high availability of the supply grid, short-term grid faults must not disconnect the generator from the grid. This "Fault Ride Through" (FRT) refers in particular to short-term undervoltages and overvoltages. Depending on the type and output of the energy generator, different requirements also apply here, which can be adapted via parameterisation in NA003-M64. Advantages: One device for the local & international market Easy handling for service personnel & Commissioning engineers Preconfigured parameter sets for various countries in Europe & worldwide Customised solutions can be implemented thanks to a wide range of configuration options FRT (Fault Ride Through) integrated Replaces older devices without changes to the control cabinet thanks to design & Availability of older certificates
SILAS SB NH000 60 AO R4
Content: 1 Piece (CHF 8.7700 / 100 Piece)
Customers also viewed
This surface-mounted socket outlet is equipped with an integrated miniature fuse with a 10A miniature fuse 5x20mm as standard. The special thing about it is that only one cable needs to be fed to the surface-mounted socket outlet, so you can operate the 32A socket outlet and the T23 socket outlet, which is separately fused.
Content: 1 Piece (CHF 369.3132 / 3 Piece)
Content: 1 Piece (CHF 18.8800 / 200 Piece)
Load-break switch, also known colloquially as a main switch or inspection switch. This is used to switch a main current on and off. The CLBS series is mainly suitable for DIN rail mounting. When used with our aluminium profiles, we recommend article 12606, 12640, 12626 or 12648.
SILAS SB NH00 60mm EB70 U5