CHF 205.12
Do you have some questions about this product?
- Your personal contact person
- Name: Aco Gorgiev
- E-Mail: aco@normrahmen.ch
- Phone: +41 31 744 10 45
-
Product Manager, Customer Consultancy Electrical Engineering, Production
Product information "Surge arrester type 1+2+3, ETITEC ML T123 300/12.5 4+0 RC, (TN-S) "
| Applied technology: | MOV |
|---|---|
| I imp (10/350) Pulse current: | 12.5kA |
| I max (8/20): | 40kA |
| In (8/20): | 20kA |
| Interchangeable surge modules: | Yes |
| Leakage current free: | No |
| Net shape: | TN-S |
| No back-up fuse required until: | 160A |
| Type: | T1, T2 & T3 |
| Uc Continuous operating voltage: | 300V |
| Uoc (1.2/50 - 8/20) Overvoltage peak: | 6kV |
| Up - Voltage protection level: | < 1.5kV |
| With remote signalling contact: | Yes |
Accessories for surge arrester type 1+2+3, ETITEC ML T123 300/12.5 4+0 RC, (TN-S)
Customers also bought
The neutral conductor contact always closes leading.
Attention, this installation contactor cannot be sealed!
Protective conductor terminal with stainless steel screws and springs
Content: 1 Piece (CHF 224.85 / 50 Piece)
Content: 1 Piece (CHF 10.49 / 100 Piece)
Customers also viewed
One device 2 protection levels The great advantage of the combined arrester is that lightning equipotential bonding and terminal device protection are provided in one device in one protection level. They are suitable for discharging high partial lightning currents and limiting transient overvoltages. The combined arresters have an energetically coordinated protective effect to the equipment within a 10 m cable path. If this is exceeded, further protective measures should be taken. Dangerous sparking and transient overvoltages in the electrical system are prevented, thereby avoiding major damage to property. Combined arresters T1-T2 are type 1 and type 2 protective devices tested in accordance with the test standard DIN EN 61643-11 (VDE 0675 Part 6-11). Their task is to control high energies, safely divert lightning currents and limit dangerous transient overvoltages to a level that is compatible with the equipment. In addition, type 1 or combi T1 & T2 surge arresters are also suitable for external lightning protection systems. (External lightning protection)
max. back-up fuse up to 125A, with remote signalling contact
max. back-up fuse up to 315A, with remote signalling contact IEC/EN type 1+2+3 Area of application: Main distribution board Iimp=12.5 kA (10/350 µs) per pole High-performance GSG / MOV Leakage and operating current free Residual current-free Maintenance-free Conformity: EN 61643-11: 2012, IEC 61643-11: 2011, VDN directive SPD hybrid model based on combined GSG and MOV technology For use in lightning protection classes III + IV High discharge capacity up to 12.5kA 10/350 µs per pole Fast response time < 25 ns with simultaneously low residual voltage Maximum safety, disconnecting device activated under zero voltage Energy-efficient, no mains follow current, operating current or leakage current Complies with the VDN directive with VDE certification for use in the pre-metering sector
Attention, this installation contactor cannot be sealed!