CHF 143.77
Do you have some questions about this product?
- Your personal contact person
- Name: Aco Gorgiev
- E-Mail: aco@normrahmen.ch
- Phone: +41 31 744 10 45
-
Product Manager, Customer Consultancy Electrical Engineering, Production
Product information "Switch-disconnector with locking device, 4-pole, 125A, 45 kW"
| Connection technology: | Screw terminal |
|---|---|
| ETIM class: | EC000216 |
| Frequency: | 50 & 60 Hz |
| Number of poles: | 4 |
| Number of wiring points: | 8 |
| Protection class: | IP 20 |
| Rated current: | 125A |
Customers also bought
The neutral conductor contact always closes leading.
max. back-up fuse up to 315A, with remote signalling contact IEC/EN type 1+2+3 Area of application: Main distribution board Iimp=12.5 kA (10/350 µs) per pole High-performance GSG / MOV Leakage and operating current free Residual current-free Maintenance-free Conformity: EN 61643-11: 2012, IEC 61643-11: 2011, VDN directive SPD hybrid model based on combined GSG and MOV technology For use in lightning protection classes III + IV High discharge capacity up to 12.5kA 10/350 µs per pole Fast response time < 25 ns with simultaneously low residual voltage Maximum safety, disconnecting device activated under zero voltage Energy-efficient, no mains follow current, operating current or leakage current Complies with the VDN directive with VDE certification for use in the pre-metering sector
NEMA 4X reliably protects an enclosure against dust, splash water, water jets and corrosion. It is suitable for outdoor use and offers additional protection against UV radiation and salty air.
NEMA 4X reliably protects an enclosure against dust, splash water, water jets and corrosion. It is suitable for outdoor use and offers additional protection against UV radiation and salty air.
NEMA 4X reliably protects an enclosure against dust, splash water, water jets and corrosion. It is suitable for outdoor use and offers additional protection against UV radiation and salty air.
Customers also viewed
The neutral conductor contact always closes leading.
EB2 circuit-breaker accessories are also compatible with ED2 switch-disconnectors.
Load-break switch, also known colloquially as a main switch or inspection switch. This is used to switch a main current on and off. The CLBS series is mainly suitable for DIN rail mounting. When used with our aluminium profiles, we recommend article 12606, 12640, 12626 or 12648.
The neutral conductor contact always closes leading.
