CHF 633.6191
Do you have some questions about this product?
- Your personal contact person
- Name: Tobias Schneider
- E-Mail: tobias@normrahmen.ch
- Phone: +41 31 744 10 42
-
Head of Product Development and Consultancy, Management Board
Product information "Circuit-breaker EB2 250/3E 125A, Icu 70kA / Ics 70kA"
| Ics: | 70kA |
|---|---|
| Icu: | 70kA |
| Number of poles: | 3 |
| Rated current: | 125A |
| Rated voltage: | 690V |
| Setting value Magnetic: | adjustable |
| Thermal setting value: | 0.4-1 x In |
Accessories for circuit-breaker EB2 250/3E 125A, Icu 70kA / Ics 70kA
Mounting from above only.
Two-part design for top and bottom.
Cannot be installed together with shunt outlet
For all EB2 sizes. I = 3A with resistive load with 24VCD/240VAC.
For all EB2 sizes. I = 3A with resistive load with 24VCD/240VAC.
Voltage range 85%-110%. Load current on actuation 3.5-7A depending on the applied voltage. As the motorised drive is designed for a short-term load, it must cool down for at least 15 minutes after 10 consecutive on/off cycles to ensure safe operation.
Voltage range 85%-110%. Load current during operation depending on the applied voltage at 3.5-7A. As the motorised drive is designed for a short-term load, it must cool down for at least 15 minutes after 10 consecutive on/off cycles to ensure safe operation.
Customers also bought
Cannot be installed together with shunt outlet
For all EB2 sizes. I = 3A with resistive load with 24VCD/240VAC.
Axle (l=358mm) supplied.
Two-part design for top and bottom.
Customers also viewed
Fault current and switch-off delay are variably adjustable. EB2 circuit-breaker accessories can be used without restriction with the exception of shunt releases and undervoltage releases.
QUADRON®185Power Speed CrossLink contacting (integrated busbar terminals) When the cover is open, all accessible parts are de-energised Operator-independent switching (switching without protective equipment) Lockable cover with double-bit lock Mixed installation with all 185 Power components Can be sealed when switched on and off Can be locked with up to 3 shackle locks when switched off The use of disconnecting blades is not approved. The rated values specified in this product description apply exclusively to the use of fuses.
Reiter NH fuse switch-disconnector KETO-000-3/60/AO/F50 to IEC/EN 60947-3, size NH000 - 125A, 3-pole for mounting on busbar system 60mm with lift terminal 1.5-50mm² cable connection at the top
Axle (l=358mm) supplied.
Axle (l=358mm) supplied.