CHF 7.03
Do you have some questions about this product?
- Your personal contact person
- Name: Tobias Schneider
- E-Mail: tobias@normrahmen.ch
- Phone: +41 31 744 10 42
-
Head of Product Development and Consultancy, Management Board
Product information "DIN rail mounting for current transformer EMCT 41"
Customers also bought
The 3-phase bidirectional meter EMU Professional 3/100 M-Bus for DIN rail mounting has four S0 pulse outputs and is suitable for energy management in accordance with ISO 50001 and energy cost billing. - DIN rail three-phase meter for direct connection - Bidirectional meter - 4x S0 pulse output (active energy supply, active energy consumption, reactive energy) - MID B+D approval for energy cost billing - Suitable for energy management in accordance with ISO 50001 - 2-tariff (day / night), tariff switching via 230V signal - Graphic display for easy reading and configuration Key technical data: Top-hat rail three-phase meter, bidirectional meter for supply and consumption 3x230/400V, 5(100)A, 50 Hz, accuracy class B (1%) Direct connection up to 100A, installation width: 5 HP (90mm) Illuminated graphic LCD 38x28mm (WxH) MID B+D ex works for billing purposes Retrievable measured values (display + M-Bus interface): Active energy consumption kWh total, tariff 1, tariff 2 Active energy supply kWh total, tariff 1, tariff 2 Reactive energy kvarh total, tariff 1, tariff 2 Voltage L1 / L2 / L3 Current total and per phase L1 / L2 / L3 Active power total + and per phase L1 / L2 / L3 Reactive power total + and per phase L1 / L2 / L3 Apparent power total + and per phase L1 / L2 / L3 CosPhi L1 / L2 / L3 Mains frequency Hz Configuration: S0 Pulse rate and time e.g.e.g. 1 / 10 / 100 / 1000 / 10,000 pulses per kWh configurable via buttons Metas - Certified
Content: 1 Piece (CHF 198.36 / 10 Piece)
Content: 1 Piece (CHF 18.29 / 3 Piece)
Customers also viewed
Content: 1 Piece (CHF 81.83 / 100 Piece)
Content: 1 metres (CHF 283.92 / 20 metres)
Content: 1 metres (CHF 323.01 / 50 metres)
The UMG 512-PRO power quality analyser (class A) measures all power quality parameters (e.g. OS up to 63rd, flicker, short interruptions, etc.) and also serves as a residual current monitoring device. In contrast to the UMG 511, it has a temperature input. The device is based on the current standards, e.g. EN 50160, IEEE519 or EN 61000-2-4. It also has a 256 MB measurement data memory and can be graphically programmed with Jasic (PLC functionality). Network interfaces and the open communication architecture with numerous protocols (Modbus, IP) enable simple integration into higher-level systems. The UMG 512-PRO has two digital inputs and two digital outputs.