CHF 302.6800
Do you have some questions about this product?
- Your personal contact person
- Name: Tobias Schneider
- E-Mail: tobias@normrahmen.ch
- Phone: +41 31 744 10 42
-
Head of Product Development and Consultancy, Management Board
Product information "Energy meter EMU Professional II 3/100, MID B+D approval, 100A direct measurement 3PN"
- DIN rail three-phase meter for direct connection
- Bidirectional meter
- 4x S0 pulse output (active energy supply, active energy consumption, reactive energy)
- MID B+D approval for energy cost billing
- Suitable for energy management in accordance with ISO 50001
- 2-tariff (day / night), tariff switching via 230V signal
- Graphic display for easy reading and configuration
Key technical data: Top-hat rail three-phase meter, bidirectional meter for supply and consumption 3x230/400V, 5(100)A, 50 Hz, accuracy class B (1%) Direct connection up to 100A, installation width: 5 HP (90mm) Illuminated graphic LCD 38x28mm (WxH) MID B+D ex works for billing purposes Retrievable measured values (display + M-Bus interface): Active energy consumption kWh total, tariff 1, tariff 2 Active energy supply kWh total, tariff 1, tariff 2 Reactive energy kvarh total, tariff 1, tariff 2 Voltage L1 / L2 / L3 Current total and per phase L1 / L2 / L3 Active power total + and per phase L1 / L2 / L3 Reactive power total + and per phase L1 / L2 / L3 Apparent power total + and per phase L1 / L2 / L3 CosPhi L1 / L2 / L3 Mains frequency Hz Configuration: S0 Pulse rate and time e.g.e.g. 1 / 10 / 100 / 1000 / 10,000 pulses per kWh configurable via buttons
Metas - Certified
| Accuracy class: | B |
|---|---|
| Bidirectional counter: | Yes |
| Blockchain technology: | Optional |
| Calibrated: | Yes |
| Energy type: | Active energy supply, active energy purchase & Reactive energy |
| Execution of the interface: | None |
| Illuminated display: | Yes |
| MID: | MID B+D |
| Maximum current (Imax): | 100A |
| Measurement type: | Direct measurement |
| Meter type: | Electronic |
| Mounting type: | REG (top-hat rail) |
| Permitted for billing purposes: | Yes |
| Polar type: | Four-wire |
| Pulse outputs: | 4 |
| Pulse type: | S0 |
| Rated current: | 100A |
| Suitable for energy management in accordance with ISO 50001: | Yes |
| Tariff execution: | Double tariff |
| Width in pitch units: | 5 Module |
Customers also bought
The 3-phase bidirectional meter EMU Professional 3/100 M-Bus for DIN rail mounting has four S0 pulse outputs and is suitable for energy management in accordance with ISO 50001 and energy cost billing. - DIN rail three-phase meter for direct connection - Bidirectional meter - 4x S0 pulse output (active energy supply, active energy consumption, reactive energy) - MID B+D approval for energy cost billing - Suitable for energy management in accordance with ISO 50001 - 2-tariff (day / night), tariff switching via 230V signal - Graphic display for easy reading and configuration Key technical data: Top-hat rail three-phase meter, bidirectional meter for supply and consumption 3x230/400V, 5(100)A, 50 Hz, accuracy class B (1%) Direct connection up to 100A, installation width: 5 HP (90mm) Illuminated graphic LCD 38x28mm (WxH) MID B+D ex works for billing purposes Retrievable measured values (display + M-Bus interface): Active energy consumption kWh total, tariff 1, tariff 2 Active energy supply kWh total, tariff 1, tariff 2 Reactive energy kvarh total, tariff 1, tariff 2 Voltage L1 / L2 / L3 Current total and per phase L1 / L2 / L3 Active power total + and per phase L1 / L2 / L3 Reactive power total + and per phase L1 / L2 / L3 Apparent power total + and per phase L1 / L2 / L3 CosPhi L1 / L2 / L3 Mains frequency Hz Configuration: S0 Pulse rate and time e.g.e.g. 1 / 10 / 100 / 1000 / 10,000 pulses per kWh configurable via buttons Metas - Certified
One device 2 protection levels The great advantage of the combined arrester is that lightning equipotential bonding and terminal device protection are provided in one device in one protection level. They are suitable for discharging high partial lightning currents and limiting transient overvoltages. The combined arresters have an energetically coordinated protective effect to the equipment within a 10 m cable path. If this is exceeded, further protective measures should be taken. Dangerous sparking and transient overvoltages in the electrical system are prevented, thereby avoiding major damage to property. Combined arresters T1-T2 are type 1 and type 2 protective devices tested in accordance with the test standard DIN EN 61643-11 (VDE 0675 Part 6-11). Their task is to control high energies, safely divert lightning currents and limit dangerous transient overvoltages to a level that is compatible with the equipment. In addition, type 1 or combi T1 & T2 surge arresters are also suitable for external lightning protection systems. (External lightning protection)
Content: 1 Piece (CHF 104.0532 / 12 Piece)
Content: 1 Piece (CHF 286.0332 / 12 Piece)
Customers also viewed
The 3-phase bidirectional meter EMU Professional 3/100 M-Bus for DIN rail mounting has four S0 pulse outputs and is suitable for energy management in accordance with ISO 50001 and energy cost billing. - DIN rail three-phase meter for direct connection - Bidirectional meter - 4x S0 pulse output (active energy supply, active energy consumption, reactive energy) - MID B+D approval for energy cost billing - Suitable for energy management in accordance with ISO 50001 - 2-tariff (day / night), tariff switching via 230V signal - Graphic display for easy reading and configuration Key technical data: Top-hat rail three-phase meter, bidirectional meter for supply and consumption 3x230/400V, 5(100)A, 50 Hz, accuracy class B (1%) Direct connection up to 100A, installation width: 5 HP (90mm) Illuminated graphic LCD 38x28mm (WxH) MID B+D ex works for billing purposes Retrievable measured values (display + M-Bus interface): Active energy consumption kWh total, tariff 1, tariff 2 Active energy supply kWh total, tariff 1, tariff 2 Reactive energy kvarh total, tariff 1, tariff 2 Voltage L1 / L2 / L3 Current total and per phase L1 / L2 / L3 Active power total + and per phase L1 / L2 / L3 Reactive power total + and per phase L1 / L2 / L3 Apparent power total + and per phase L1 / L2 / L3 CosPhi L1 / L2 / L3 Mains frequency Hz Configuration: S0 Pulse rate and time e.g.e.g. 1 / 10 / 100 / 1000 / 10,000 pulses per kWh configurable via buttons Metas - Certified
Our built-in socket outlets meet the high requirements of the Swiss standard series SN 441011. Ideally suited for equipping new distribution boards or for existing distribution boards to replace old built-in socket outlets.
Content: 1 Piece (CHF 142.6920 / 30 Piece)
SILAS SB NH000 60 AO R4
Content: 1 Piece (CHF 1,295.0380 / 4 Piece)
Content: 1 Piece (CHF 92.8146 / 6 Piece)
Reiter NH fuse switch-disconnector KETO-000-3/60/AO/F50 to IEC/EN 60947-3, size NH000 - 125A, 3-pole for mounting on busbar system 60mm with lift terminal 1.5-50mm² cable connection at the top
The 3-phase bidirectional meter EMU Professional 3/75 Modbus for DIN rail mounting has an integrated RS485 Modbus RTU and ASCII interface and is suitable for energy management in accordance with ISO 50001 and for billing energy costs. Modbus RTU and ASCII interface The Modbus RTU and ASCII interface is integrated in the energy meter and protected against dirt and tampering. Modbus RTU (Remote Terminal Unit) transmits the data in binary form. Modbus ASCII transmits the data in ASCII code. The EMU Professional communicates via Modbus at 9,600, 19,200, 38,400, 57,600 and 115,200 baud. Overview of functions -RS485 Modbus interface -Bidirectional three-phase meter with S0 pulse output 3x230/400V -Direct connection up to 75 A -2-tariff (day / night), tariff switching via 230V signal -High load opto power MOSFET S0 pulse output, 5-230V AC -or V DC, max. 90 mA -MID B+D, ex works for billing purposes -Accuracy class B (1%) Retrievable measured values on the energy meter -Reactive power (kvar) -Reactive energy inductive (kvarh) and capacitive (kvarh) -Active power (kw) -Active energy consumption (kWh) and delivery (kWh) -Apparent power (kVA) -Current (A) -Mains frequency (Hz) -Number of power failures Adjustable pulse rate and time: -Pulse rate per kWh: 0.001, 0.01, 0.1, 1, 10, 100, 1000 or 10000 -Pulse length in milliseconds: 4 to 250 ms, adjustable in 2 ms increments Configuration ex works -Direct connection: 1,000 pulses/ 40 ms Connection: 3ph. Direct 75A Interface: Modbus RTU, RS 485 Approval: MID B+D